Omron Sentech STC-MC202USB UXGA (1600 x 1200) Mini USB 2.0 Color CCD Camera C-mount

 

Omron Sentech STC-MC202USB Description:

The STC-MC202USB is an ultra-compact, progressive scan, UXGA, USB camera with a 1/1.8" color CCD. It features 15fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STCMC202USB is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

STC-MC202USB features include:

1/1.8" CCD Image Sensor, UXGA (2 Megapixel)
Ultra-Compact Size
Hardware & Software Trigger

Specifications

Image Sensor	1/1.8” Interline UXGA color progressive CCD: ICX274AQ (Sony)
Total Picture Element	1688 (H) x 1248 (V)
Effective Picture Element	1628 (H) x 1236 (V)
Chip Size	8.50 (H) x 6.80 (V) mm
Cell Size	4.40 (H) x 4.40 (V) µm
Scanning System	Progressive
Resolution	1600 (H) x 1200 (V) (Full scanning) 1600 (H) x 544 (V) (1/2 partial scanning) 1600 (H) x 208 (V) (1/4 partial scanning)
Scanning Methods	Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning
Maximum Frame Rate - Full Scanning	15.32 fps (Normal) / 7.66 fps (1/2 clock) / 3.83 fps (1/4 clock)
Maximum Frame Rate - 1/2 Partial Scanning	30.63 fps (Normal) / 15.31 fps (1/2 clock) / 7.65 fps (1/4 clock)
Maximum Frame Rate - 1/4 Partial Scanning	61.27 fps (Normal) / 30.63 fps (1/2 clock) / 15.31 fps (1/4 clock)
Pixel Frequency	36.818 MHz (Normal) / 18.409 MHz (1/2 clock) / 9.20453 MHz (1/4 clock)
Video Output	8bit / 10bit / 12bit
Minimum Scene Illumination	7.7 Lux at F1.2
Sync System	Internal
Electronic Shutter	Auto / Manual (software selectable)
Normal	1/36,818,18 to 1/15.32 seconds
1/2 Clock	1/18,409,091 to 1/7.66 seconds
1/4 Clock	1/9,204,545 to 1/3.83 seconds
Gain	Auto / Manual (software selectable)
Gamma	Manual (software selectable)
White Balance	Auto / Manual / One shot (software selectable)
Trigger Mode	Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable)
Input / Output	USB 2.0 High Speed
Power - Input Voltage	5 Vdc through USB connector ( 4.4 to 5.25V)
Power - Consumption	< 450 mA
Dimensions	28 (W) x 28 (H) x 42 (D) mm (excluding connector)
Lens Mount	C mount
Weight	Approximately 45g
Interface Connector	USB: mini-B USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent)
Temperature - Operational	0 ~ 40 deg. C
Temperature - Storage	-30 ~ 65 deg. C
Vibration	20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock	Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy	EMS: En61000-6-2, EMI: EN61000-6-3 (Class B)
RoHS	RoHS Compliant